Flex M Class Safety Vacuum Cleaner

• Level monitor, no malfunctions when drawing in liquids thanks to installed float valve
• With appliance socket and electronic automatic switch on/off
• Soft start stops any voltage peaks at the start and the run-on feature (5 sec. overrun) empties any remaining dust in the vacuum hose
• With accessories magazine for suction nozzles and suction tubes on the back
• Equipped with large wheels and two swivel guide rollers
• Features a filter bag made of highly tear-proof fleece for optimum filling. The extracted dust can be disposed of without difficulty
• Selector switch suction diameter of 32 mm or 21 mm to adjust the optimum flow rate
• The flow rate control via the rotary switch minimises possible vacuums on the surface during intermediate and finish sanding
• Dust-protected antistatic finish prevents electric charging of the suction hose
• Class M safety vacuum cleaner, suitable for all dusts with OEL values ≥ 0.1 mg/m³. Specifically for mineral and timber dusts (also beech and oak)
• Flow sensor technology monitors the flow rate and emits an audible signal to indicate any drop below the statutory minimum value of ≤ 20m/s

Technical Data

• Power consumption - 1200 W
• Voltage - 230V
• Frequency - 50/60 Hz
• Vacuum cleaner flow rate - 3700l/min
• Max. vacuum - 24500 Pa
• Tank volume - 20 L
• Equipment socket - Yes
• Automatic switch-on, power tools - Yes
• Suction power control - mechanical
• Hose length - 3.5 m
• Number of suction motors - 1 Cont.
• Cable length - 7.5 m
• Dimensions WxLxH - 377 x 387 x 506 mm
• Weight - 9.5 kg