Rubi TX-1020 MAX Manual Tile Cutter (17915)
Rubi TX-1020 MAX Manual Tile Cutter (17915) is backordered and will ship as soon as it is back in stock.
Couldn't load pickup availability
Returns & Refunds
Returns & Refunds
Consumer- Faulty, Damaged or Incorrect Goods
It is our responsibility to ensure that all goods are of a satisfactory quality, fit for purpose and as described on our website. If, for any reason, products do not comply with this, for example, are faulty, then you have the right to a full refund within 30 calendar days of receiving your goods.
Please contact us within 48 hours of receiving your goods to make us aware of any discrepancies with the goods that you have ordered. This will allow us time to remedy the situation or to replace any faulty/damaged goods.
Returned faulty goods will be tested upon their return to us to find out the cause of the defect. Where possible, a replacement will be sent to you. If a replacement is unavailable, then we will offer you an alternative product, if available, or issue a full refund using the same payment method that you used when ordering the Goods (unless you specifically request a different method). Within 14 days of finalising the return and checks, we will issue this refund.
Your refund will include the original delivery cost if we confirm that the item is faulty. However, if you return the item for any other reason, you will need to cover the return postage expenses.
Please note, if you are returning a hazardous item such as a product that contains a battery, you must declare this to the courier and label the package accordingly.
Consumer- Returning Goods if you Change Your Mind.
Returned items proven not to be faulty will be subject to a restocking charge of up to 25% of the product value. This will include payment fees, inspection of goods, and the restocking of products. The restocking charge can vary depending on product size and complexity.
Should you decide to change your mind about the Goods you ordered, you can return them to us within 30 calendar days. The customer is required to cover the return delivery charges for the goods. Postage charges for faulty items will be refunded by Tiles and Trims. The customer is responsible for the full delivery charge in the case of any other reason, including a change of mind.
In the event of a customer returning a product based on a change of mind, then it is essential that goods are returned unused, undamaged and in their original condition. Any refunds issued may take up to 14 days to process.
Business to Business Returns
Please note, if you are a business and wish to return your Goods, we review each return request on a case by case basis.
On delivery, if you are not satisfied with the Goods that you have received and wish to return them to us then you may do so provided:
- You inform Tiles and Trims of your wish to return the goods within 48 hours of delivery. We also request that you provide a reason for the return.
- The Goods remain unsed and in their original condition.
- The Goods are returned at your own risk, and you agree to pay for delivery back to us.
When goods are returned to us, we will inspect them for any faults. If a product is deemed to be faulty, we may refund the cost of delivery at our discretion.
We may offer you a credit or refund at our discretion. This will be issued to you once we receive the original product back and inspected it for any faults. Any refunds issued may take up to 14 days to process.
Delivery and Shipping
Delivery and Shipping
We aim to get all orders placed before 2pm shipped on a next day service. This ultimately depends on the physical size and weight of your order. Some of the larger sized items need to be shipped on an economy service which takes longer, we will contact you to confirm an estimated delivery date proir to despatch.
Some items are shipped directly from the manufacturer and therefore delivery will take longer, please see the message below.
Description
Description
Rubi TX-1020 Max Manual Tile Cutter
The range of TX-MAX professional manual cutters are perfect for INTENSIVE cutting of all types of ceramic tile. Thanks to its high performance MULTIPOINT breaker and its rotating square system, TX-MAX models allow easy and quick execution of angular cuts (from 0º to 45º), especially in porcelain stoneware tiles (AIa / BIa). Its high separation power (up to 1200 kg) allows the TX-MAX cutters to have an excellent behavior with extruded stoneware.
Tubular steel guides of 30 mm in diameter and the head with extra-long aluminum slides give an impressive structural robustness, making the most of the models with the highest cutting capacity.
The advanced position of the rivet increases the visibility during scratching and separation, and the gripper incorporates a protective, removable, which allows to work on the most delicate surfaces without risk of leaving marks.
The separator mechanism allows the use with one hand, facilitating the locking and unlocking of the gripper by means of a ratchet and trigger system. This system increases the performance of work, both in the materials of low thickness as in those of greater thickness (from 3 to 21 mm without the protector, and up to 19 with the anti-marking protector that includes the trap).
As a complement to the floating table system, the 1020 model is equipped with two additional side arms, to increase the support surface with large-format tiles.
All models of the TX-MAX range include a lateral stop for the measurement and blocking of repetitive narrow cuts and strips, as well as two cords (8 mm and 22 mm EXTREME) and the traditional case carry case.
The TX-MAX manual cutters are compatible with the full range of RUBI PLUS scoring wheels.
* There are some ceramic materials, with thicknesses exceeding 15 mm, which due to their physical characteristics, possible internal tensions or finishes, present difficulties to be cut manually. It is advisable to make some sample cuts to determine the compatibility of the product.
Features
- Tubular steel guides of Ø30 mm x 2 mm in wall thickness
- Head with aluminum slides, extra-long, with "self-lubricated" friction bushes
- Mobile separator with aluminum clamp, equipped with plastic protector to avoid marking on the most delicate surfaces
- The locking of the gripper, by ratchet mechanism, and unlocking, by trigger, allows scratching and separating with one hand. Greater SPEED of use. Increase performance in both thin and thick materials
- Better visibility of the area of scratching and cutting
- Aluminum injection base, reinforced by central rib, for greater Robustness
- Galvanized steel floating tables, increases the stability in the cut
- Revolving square, central pivot. Greater precision in the angular cuts.
- With lateral stop for repetitive cuts and narrow strips
- Equipped with 2 supplementary arms for large format ceramics
- Handle with soft grip grip for greater ergonomics and comfort
- Equipped with 8 mm and 22 mm EXTREME scoring wheels, compatible with the full range of PLUS scoring wheels.
- Includes carry case.
Specifications
Specifications
-
Maximum Cutting Length (cm)
-
Diagonal Cutting Length (cm)
-
Maximum Cutting Thickness (mm)
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.